CommunityInjection Technique

Are You Using Lilac Cap RT30?

21 replies10 peopleJun 4, 2026☆ Follow
Summary

Are lilac cap RT30 kits safe given reports of sterility issues?

Users report mixed experiences with lilac cap RT30 vials. Some noticed increased inflammation or had to adjust doses due to fill variations, while others experienced no unusual effects and found the product effective. Sterility failures were noted in at least one tested batch despite passing other assays, and an ongoing group investigation was mentioned but not detailed here.

What this discussion establishesWhere people disagree

Whether higher endotoxin levels are causing noticeable issues for most users or if reactions vary widely by individual

Still open

Specific sterility test results and endotoxin counts for the lilac cap batches under discussion

Nothing here is advice.

21 replies · 10 people
PlainPebble75archiveopening postJun 4

I've got several matching containers with the purple tops tucked in the freezer, three that are identical plus one more from elsewhere sharing that cap shade. Anyone who's injected this compound from kits resembling the image, did any extra reactions show up beyond the typical ones tied to it? Reports of contamination issues have popped up across sources for this version with the light purple seal. I couldn't track down the exact toxin numbers, though they probably don't reach the extreme publicized levels.

SharpWillow20archiveJun 4

Lately after beginning with these my joints started hurting more often. There's also been extra swelling throughout my body lately. So now I suppose I should check into some kind of separation method.

SlowTimber22archiveJun 4

I saw on the analysis for my product it lists 36.5 milligrams. This required me to change how much I consume.

PlainPebble75archiveJun 4
↳ replying to @SlowTimber22

After you changed the amount, has everything gone smoothly?

SlowTimber22archiveJun 4

At the moment things seem fine. The unwanted effects have settled. I'm going with a reduced amount and should have a better idea after about ten to fourteen days.

SlowTimber22archiveJun 4

If endotoxins were causing trouble I'd expect a fever by now. I've used both substances including just a tiny bit of the second one. I cut back hard on that lately.

ClearQuill84archiveJun 4

Right now I'm expecting my order to arrive soon. I did some checking on chat groups. People who've tried this one haven't run into any problems. On the flip side they all report that it functions great.

WarmQuill56archiveJun 5

I joined others checking a batch back then. It cleared the m&p checks with low endo readings yet did not pass sterility. The material came from two months earlier.

ClearQuill84archiveJun 5
↳ replying to @WarmQuill56

Do you mind to share what was the sterility level?

WarmQuill56archiveJun 5

Not sure how they measure.

SlowBramble52archiveJul 11
↳ replying to @SharpWillow20

I noticed filtration left the endotoxins untouched which felt disappointing. That made me stay extra cautious overall.

SlowBramble52archiveJul 11

Anyone around PTDS these days? Some checking seems underway with those lilac caps and I'm thinking we could look into it together.

ClearAnchor99archiveJul 11

My light purple thirty set sits tucked away in cold storage. It will stay untouched while I work through the smaller sizes first, which should take quite a while. PTDS means nothing to me so any fresh details posted here would be welcome.

PlainPebble75archiveJul 11
↳ replying to @SlowBramble52

I have no idea what ptds refers to since I'm not involved with it at all. Still, the outcome of this probe catches my attention. Could you either explain the way to get in or give me an overview of what's being said?

PatientWillow72archiveJul 11
↳ replying to @PlainPebble75 (opening post)

These days I'm taking the R30 kind. Everything runs smoothly and it outperforms the updated R20 batch from earlier. Suppression stays minimal on the R20. The R30 looks effective though. Yet that lilac version has existed longer than the rest. Odd how things turn out.

SlowBramble52archiveJul 13
↳ replying to @PlainAlder11

I don't recall exactly what that P means, could be private, but the server name ends up as Testing Discord Server. They collect and combine data from tests and support more thorough larger scale testing across many areas.

SlowBramble52archiveJul 13
↳ replying to @PatientWillow72

Folks don't all respond the same way to bigger amounts. It's nice that this worked out fine and you're doing really well.

IronMarble78archiveJul 13

Don't they all share that one origin?

PlainPebble75archiveJul 13
↳ replying to @SlowBramble52

I wonder what folks mentioned regarding those purple-lidded RT30 items. Have any other lab people tried them out, and did problems come up?

ClearQuill84archiveJul 13
↳ replying to @PlainPebble75

At the moment I'm using it. My starting container is almost finished. It operates flawlessly without any difficulties.

Add your experience

If you have tried it, this topic is still open. Sign in to reply — it takes a minute.